Category

Pipelay Vessel

Definition Pipelay Vessel or Pipe Laying Vessel refers to the vessel used by the offshore oil and gas industry to install subsea all the connecting infrastructures such as pipelines, umbilicals or electrical cables Comments These subsea infrastructures may be installed to connect floating units on the surface to the seabed, or from shore to floating […]

Read

Elastomer

Definition Elastomer comes from the contraction of elastic polymer. Elastomer refers to any material, such as but not limited too natural rubber or synthetic rubber, that is able to resume its original shape after removing a deforming force on it. Elastomer may also be called rubber. Comments Elastomer is an amorphous polymer with a special […]

Read

Umbilical

Definition Umbilical refers in the oil and gas industry to the connections used offshore between the subsea equipment and platforms or floating production units and enabling the control from the surface. The umbilicals are made of steel or thermoplastic to be flexible and in the same time to resist to operating conditions. Comments Umbilicals provide control, power, […]

Read

Petro Arctic

Definition Petro Arctic is a Norwegian association to promote the potential suppliers willing to participate to the development and operations of the offshore oil and gas projects in North Norway and the Barents Sea.  Comments Petro Arctic was created in 1997 to involve local companies in the Snøhvit LNG project. Since then the mission of Petro […]

Read

Benzene

Definition Benzene is a colorless, sweet smelling, highly toxic, flammable, liquid aromatic hydrocarbon. Derived from petroleum, Benzene is used in or to manufacture a wide variety of petrochemical products. Benzene evaporates into the air very quickly and dissolves slightly in water. Benzene may also be called benzine or benzol. Comments Because of its famous chemical […]

Read

Pyrotol

Definition Pyrotol is a trademark owned by CB&I Lummus from The Netherlands to designate a chromium – alumina catalyst used in the petrochemical industry. Comments The Pyrotol process converts hydrocarbons C6 to C9 fraction of pyrolysis liquids obtained as a by-product of the ethylene production. This process requests consistent hydro-cracking of non-aromatics, but a limited amount of […]

Read
Scroll to Top